« Go back

ACCESSORIES FOR CHEMICAL FEED SYSTEMS

 
FFLD-1 TUBING RUPTURE DETECTOR
Designed to sense and alarm on chemical leaks due to ruptured peristaltic pump tubing.
PERISTALTIC HOSE PUMP TUBING AND TUBING CONNECTORS
Rugged, long-life peristaltic pump hose in a wide variety of sizes. Color-coded connectors make it easy to match the connector to the right size tubing. Tubing and connectors are compatible with many commercially available peristaltic pumps.
SIGMAMOTOR PRESSURE RELIEF AND BACK PRESSURE VALVES
Sigmamotor back pressure valves prevent siphoning and varying rates of dosage from fluctuating downstream pressure by enacting positive discharge pressure in your metering pump system. Pressure relief valves operate when the system pressure raises above the set pressure of the valve to protect systems from damage due to blockages or excessive pressure situations.
SIGMAMOTOR PVC CALIBRATION CYCLINDERS
Sigmamotor Calibration Cylinders will enhance your chemical feed systems by allowing verification of the flow rate of the feed pump. Sigmamotor Calibration Cylinders are critical to accurate determination of your system flow rate, either at start-up or following maintenance.
SIGMAMOTOR GLASS CALIBRATION CYCLINDERS
Sigmamotor Calibration Cylinders will enhance your chemical feed systems by allowing verification of the flow rate of the feed pump. Sigmamotor Calibration Cylinders are critical to accurate determination of your system flow rate, either at start-up or following maintenance.
SIGMAMOTOR PULSATION DAMPENER
SigmaMotor FL Series Pulsation Dampeners offer an inexpensive solution to protect chemical feed systems from harmful effects of pulsating flows. The simple chargeable design is CNC machined from PVC, CPVC, Polypropylene, PTFE or PVDF. There are no exposed metal bolts. The FL Series provides smooth, steady flows for better flow metering accuracy.
SIGMAMOTOR GAUGE ISOLATOR
Sigmamotor pressure gauge isolators allow standard pressure gauges to be used in corrosive services. The upper section (gauge side) is filled with glycerine. A diaphragm separates the glycerin from the lower section which connects to the pressure source. A 1/2" FNPT port is provided for connection to the pressure source. Materials are PVC body with Viton(TM) diaphragm. Optional adjustable flow switch built into the pressure gauge!
SIGMAMOTOR INJECTION QUILL
SigmaMotor IQ Series Injection Quills are used to provide safe delivery of chemicals into pipelines. The quill end ensures the dispersion of the chemicals away from the pipe wall. The integral spring loaded check valve prevents backflow from the pressurized pipe if there is a break in the discharge piping. A union connection on the inlet allows for ease of installation and maintenance.




Home Page Applications Products Support Contact Us