FLOMOTION SYSTEMS
DIAPHRAGM METERING PUMPS

~ Selection Chart ~

PP-1 SYSTEM
 PP Series Diaphragm Metering Pump Systems
 Pre-plumbed and wired for fast installation and trouble-free setup. Available with pumps shown below.
   

SERIES AA

SERIES B & C

 Series AA, B & C Diaphragm Chemical Metering Pumps
 Series AA, B & C Chemical Metering Pumps have been an industry standard for over 20 years. The familiar yellow and black pumps have a rugged, totally enclosed, chemically resistant housing for protection in the harshest environments. Flow rates to 25.0 GPH and pressures up to 300 psi.

 

SERIES E7
 Series E7 Explosion Proof Electronic Metering Pumps
The Series E Metering Pump is designed for use in hazardous environments. It meets or exceeds all standards for Class I, Division I, Groups C and D; Class II, Division I, Groups E, F and G. The stroke speed may be controlled manually or externally by a digital input or a milliamp input with the use of an A to D converter. Flow rates to 20.0 GPH and pressures to 300 psi.

SERIES G

Series G Motor-Driven Metering Pumps
The Series G Metering Pump is designed for high output applications. The drive incorporates a variable eccentic design which ensures smooth output and reduces system shock. An ideal pump for water treatment applications. DC variable speed drives are available for external control and automation. Flow rates to 310 GPH and pressures to 150 psi.

SERIES H9
 Series H9 High Pressure Electronic Metering Pumps
The Series H9 Metering Pump is designed for very low output injection into high pressure systems. Type “9” control is standard with the stroke speed manually controlled or externally controlled by a digital or milliamp input. Flow rates to 0.14 GPH and pressures to 1000 psi.

 

SERIES J5
Series J5 (12VDC) Electronic Metering Pumps
The Series J5 Metering Pump is designed for remote applications where AC electrical power is unavailable. The low power consumption makes it ideal for agricultural and solar powered installations. Manual control of stroke speed and stroke length or external control of stroke speed by a digital input for flow proportional applications. Flow rates to 2 GPH and pressures to 140 psi.

   

SERIES P

Series P Chemical Metering Pumps
The Series P Metering Pump is designed for more ecomomical chemical injection. Dual manual control of stroke speed and length and fixed speed versions are available for simple manual or on/off control. Flow rates to 2.0 GPH and pressures to 250 psi.

Accessories and Maintenance Kits
RPM pump o-ring kits, tanks, calibration cylinders, auto-prime valves, pressure relief valves, agitators, etc.

FLOMOTION SYSTEMS, INC.
586 N. French Rd., Buffalo, NY 14228 ~ 800-909-3569