FLOMOTION SYSTEMS
PERISTALTIC PUMPS

~ Selection Chart ~
PP1H & PP2H Peristaltic Pump Chemical Feed Prepackaged Systems

PP1H & PP2H Peristaltic Pump Chemical Feed Prepackaged Systems
SINGLE OR DUAL-PUMP MODELS FEATURE
FLOMOTION INDUSTRIAL HOSE PUMPS
SELF PRIMING WITH BUILT IN SPILL AND LEAK PREVENTION
The PP1H and PP2H (dual pump model) an ideal choice for hard-to-handle chemicals such as sodium hypochlorite, hydrogen peroxide or viscous polymers. Flow rates from .017 to 48 gallons per hour.

2001HSP Self Priming Analyzer Sample Pump

2001HSP Self Priming Analyzer Sample Pump
FIXED SPEED INDUSTRIAL SAMPLE PUMP
Exceptional self-priming capabilities make the 2001HSP an ideal choice for continuous sampling. Flow rates from 6.8 to 980 ml/min depending on gear ratio and tubing size.

2001HE/ HEC Peristaltic Pumps with integral motor drive controller

2001H Series Peristaltic Pumps with NEMA 4X remote mount or built-in motor drive controller
COMPACT VARIABLE SPEED INDUSTRIAL HOSE PUMP

Compact design and excellent self-priming capabilities make the 2001HEC an ideal choice for hard-to-handle chemicals such as sodium hypochlorite, hydrogen peroxide or viscous polymers. Flow rates from .017 to 49 gallons per hour.

2001V/VE Peristaltic Pump Systems

2001V Series Peristaltic Pump Systems
INDUSTRIAL HOSE PUMP WITH NEMA 4X REMOTE MOUNTED CONTROLLER
Exceptional self-priming capabilities make the 2001V Series an ideal choice for hard-to-handle chemicals such as sodium hypochlorite, hydrogen peroxide or viscous polymers. Flow rates from .004 to 98 gallons per hour (with dual pump-head option.)

4001V/VE ANACONDA Peristaltic Pump

4001V/VE ANACONDA Peristaltic Pump
HIGH FLOW INDUSTRIAL HOSE PUMP
WITH 2 REMOTE MOUNTED CONTROLLER OPTIONS
Self priming pump can be run dry without damage. Flow rates from 1 to 330 GPH. Pressures to 100 psi.

ALH SERIES Industrial Hose Pumps
HIGH CAPACITY INDUSTRIAL HOSE PUMP

Self priming high capacity pump can be run dry without damage. Flow rates from 0.02 to 387 GPM (1 to 23,220 GPH). Pressures to 217 psi.


ACCESSORIES FOR CHEMICAL FEED SYSTEMS


Flomotion Systems Peristaltic Hose Pump Tubing and Connectors

PERISTALTIC HOSE PUMP TUBING AND TUBING CONNECTORS
Rugged, long-life peristaltic pump hose in a wide variety of sizes. Color-coded connectors make it easy to match the connector to the right size tubing. Tubing and connectors are compatible with many commercially available peristaltic pumps.

Flomotion Systems Peristaltic Hose Pump Tubing and Connectors

SIGMAMOTOR PRESSURE RELIEF AND BACK PRESSURE VALVES
Sigmamotor back pressure valves prevent siphoning and varying rates of dosage from fluctuating downstream pressure by enacting positive discharge pressure in your metering pump system. Pressure relief valves operate when the system pressure raises above the set pressure of the valve to protect systems from damage due to blockages or excessive pressure situations.

SIGMAMOTOR CALIBRATION CYCLINDERS
Sigmamotor Calibration Cylinders will enhance your chemical feed systems by allowing verification of the flow rate of the feed pump. Sigmamotor Calibration Cylinders are critical to accurate determination of your system flow rate, either at start-up or following maintenance. PVC cylinders are made from clear PVC with gray PVC ends that are NSF 61 rated. Glass Cylinders are also available.

SIGMAMOTOR PULSATION DAMPENER
SIGMAMOTOR PULSATION DAMPENER
SigmaMotor FL Series Pulsation Dampeners offer an inexpensive solution to protect chemical feed systems from harmful effects of pulsating flows. The simple chargeable design is CNC machined from PVC, CPVC, Polypropylene or PVDF. There are no exposed metal bolts. The FL Series provides smooth, steady flows for better flow metering accuracy.
SIGMAMOTOR GAUGE ISOLATOR
SIGMAMOTOR GAUGE ISOLATOR
Sigmamotor pressure gauge isolators allow standard pressure gauges to be used in corrosive services. The upper section (gauge side) is filled with glycerine. A diaphragm separates the glycerin from the lower section which connects to the pressure source. A 1/2” FNPT port is provided for connection to the pressure source. Materials are PVC body with Viton™ diaphragm. Optional adjustable flow switch built into the pressure gauge!
SIGMAMOTOR INJECTION QUILL
SIGMAMOTOR INJECTION QUILL
SigmaMotor EL Series Injection Quills are used to provide safe delivery of chemicals into pipelines. The quill end ensures the dispersion of the chemicals away from the pipe wall. The integral spring loaded check valve prevents backflow from the pressurized pipe if there is a break in the discharge piping. A union connection on the inlet allows for ease of installation and maintenance.




© Copyright 2002-2004 Flomotion Systems, Inc. All rights reserved.
165 Creekside Drive, Suite 112, Buffalo, NY 14228-2103
info@flomotionsystems.com
800-909-3569
716-691-3941


~