< GO BACK
FLOMOTION SYSTEMS
DIAPHRAGM METERING PUMP ACCESSORIES
~ Selection Chart ~
RPM Pro PacTM Kits

Spare parts kits are available for all LMI Chemical Metering Pumps.

RPM Pro PacTM Kits for LiquiProTM Liquid Ends (300 Series) include all of the parts that are required for routine preventive maintenance.

The convenient, clear skin packaging and liquid end drawing ensure quick and easy replacement of expendable parts.

Data Sheet*
Chemical Storage Tanks

LMI manufactures storage tanks in 10, 35, and 50 gallon sizes. All tanks have a molded in recess for an LMI Metering Pump.

The 35 Gallon Tank features a pump mounting location at the base of the tank providing flooded suction which is ideal for off-gassing chemicals and applications where very low output is required. All tanks feature heavy wall construction of UV resistant polyethylene.

Data Sheet*
10 & 35 Gallon Tanks
50 Gallon Tank
Remote Flowmeter Pulsers

LMI's RFP Remote Flowmeter Pulser provides a simple method to feed chemical in proportion to water flow. All that is required is the Flowmeter Pulser and the appropriately sized LMI Pump.

The wall mount divider may be installed up to 100 feet from the flowmeter for easy user access. No other timers, relays or control valves are required. Flowmeters are available from 3/4” to 6” for flow rates from 0.44 to 1300 GPM.

Data Sheet*
Diaphragm Back-Pressure/Anti-Syphon Valves

These valves apply positive discharge pressure to a metering pump system and act to stabilize the output of higher output metering pumps when pumping into low or no-pressure systems.

Pressure relief valves are designed to protect chemical feed systems from overpressure damage caused by defective equipment or deadheading.

Valves are available in 1/4”, 1/2”, and 1” sizes in PP, PVC, PVDF, and 316SS.

Back Pressure / Anti Syphon Data Sheet*
Pressure Relief Valve Data Sheet*
Micropace Converters

Micropace Control Modules enable you to divide or multiply a digital input or respond directly and proportionally to a 4 - 20 milliamp input.

MP100 4-20mA Analog to Digital Converter
Connects to any A7, B7 or C7 pump and converts an analog 4-20mA DC current signal to pulses for remotely controlling the pump speed (stroke frequency).

MP-400D Pulse Divider (Counter)
MP-500M Pulse Multiplier (Batch Signal Converter)

Instruction Sheet*
Digi-Pulse Flow Monitors

Digi-Pulse Flow Monitors solve the age-old question “How do I know if my pump is pumping?” This innovative product is designed to be used with our Type “9” Metering Pumps to provide the user with verification of pump performance.

If the Flow Monitor detects output loss, it will shut the pump off and close a switch that may be tied to an alarm. The alarm signal may also be used to trigger a stand-by pump.

Data Sheet*
Digi-Pulse FM Pro 0.05 - 5.0 ml/stroke 7.9 GPH
Digi-Pulse FM 200 0.05 - 5.0 ml/stroke 7.9 GPH
Digi-Pulse FM 300 0.05 - 5.0 ml/stroke 7.9 GPH

Calibration Cylinders

Calibration cylinders are designed to enhance the performance of chemical feed systems by providing a verification of the flow rate of the chemical feed pump.

PVC Cylinder Features:
Robust construction of clear PVC with an easy to read graduation in mls and gph. Available in three models: EZ-Clean, Vented, and Open Top; and 6 sizes; 100 mL, 200 mL, 500 mL, 1000 mL, 2000 mL, 4000 mL, 10,000 mL, and 20,000 mL.
  • High Reliability / Low Cost
  • High Contrast Graduation Markings
  • Clear Easy-View Tube
  • Robust Construction
  • Direct GPH Readout
  • Sealed Top with Overflow Connection
  • Optional EZ-Clean Model
  • Optional Open Top with Dust Cap
Glass Cylinder Features:
 Constructed of borosilicate glass and a choice of 5 end cap materials, (PVC, PTFE, PVDF, 316 SS, A20) these cylinders are suitable for use with most chemicals. 6 sizes; 100 mL, 200 mL, 500 mL, 1000 mL, 2000 mL, 4000 mL.
  • High Reliability / Low Cost
  • Borosilicate Glass Tube
  • 5 End Cap Materials (PVC, PTFE, PVDF, 316 SS, A20)
  • Easy Disassembly For Cleaning
  • Protective Outer Shield
  • High Contrast Graduation Markings
  • US, Metric & GPH Scales
  • Sealed Top with Overflow Connection

PVC Data Sheet*
Glass Data Sheet*



Auto-Prime Valve
Allows for the constant removal of vapors and gases in Sodium Hypochlorite and Hydrogen Peroxide applications. The new AutoPrime Valve offers many features unique in the marketplace. The pump primes automatically and functions as an air-gap anti-siphon valve. Pump output is regulated by venting the discharge to atmosphere during each stroke, eliminating the need for a back-pressure device. In addition, it provides a vertical discharge, traditional in pump applications.

The AutoPrime Valve offers a flow range of .08 to 5.0 milliliters per stroke with a maximum pump output of 8.0 gallons per hour. Stroke rates are 5 to 100 per minute with a stroke length of 30 to 100%. Maximum operating pressure is 250 psi.

The new valve consists of four functional elements: the vent check valve, discharge check valve, the anti-siphon check valve and the return line. The vent check valve constantly removes gases when they are drawn into the suction line of the pump. If the pump remains idle for a length of time, the valve allows the gases to escape into the return/vent line.

The discharge check valve allows the discharge of fluid from the AutoPrime Valve. The design regulates the output at lower pressures, preventing over pumping. The anti-siphon check valve opens to atmosphere should a vacuum be introduced, creating an air-gap condition.

Data Sheet*

Four Function Valve (4FV)

This compact and economical valve performs four important functions for your LMI pump:

  • Diaphragm type anti-syphon protection
  • Back pressure
  • Priming aid/line drain
  • Pressure Relief

Priming with the 4FV is simple and is achieved by a turn of the pressure relief knob. We highly recommend this accessory for every LMI electronic pump.

Data Sheet*

Bleed Four Function Valve (B4FV)

The Bleed Four Function Valve is designed to be used with LMI pumps that are handling chemicals that off-gas readily such as sodium hypochlorite.

It allows the gases to escape without causing the pump to lose prime.

The economical B4FV will fit new or existing LMI pumps; there is no need to replace the entire head assembly. Constructed of PVDF for durability and excellent chemical resistance.

Data Sheet*
Wall Mount Bracket

This molded polypropylene wall mount bracket is rugged and chemically resistant. Molded with mounting holes to accept any LMI electronic pump, installation is quick and easy.

All of the hardware is included to attach the bracket to a stud or block wall and to mount your LMI pump.

Data Sheet*

High Viscosity Liquid Ends

  • Pump polymers without dilution
  • Pumps may be used with flooded suction or with as much as 3.5 ft (1M) of suction lift.
  • May be run dry without damage.
  • Pump polymers and other thixotropic viscous liquids with apparent viscosities up to 40,000 centipoise.
Agitators

LMI offers a range of agitators with fractional horsepower motors to fit our 35 and 50 gallon tanks. Impellers are available in Neoprene R and epoxy coated stainless steel for a wide variety of chemicals. Mounting hardware and a pump suction tube wand are included to complete the installation.

Data Sheet*

* Requires Adobe Acrobat Reader


FLOMOTION SYSTEMS, INC.
586 N. French Rd., Buffalo, NY 14228 ~ 800-909-3569